PVDF Nitrogen Gun Filter, 0.8 um, 25mm (Pack of 10 filters)
This replacement filter is a 0.8-micron syringe filter made of PVDF (polyvinylidene fluoride) material with a diameter of 25mm. This filter is specifically designed to be used inside the gun cap of the AQUIS Nitrogen Spray/Drying Gun (ANG) for the purpose of dispensing nitrogen or other inert gases.
| Filtration area(cm2) |
4.08 |
| Wettability |
Hydrophobic |
| Maximum operating temperature |
100 Degrees C |
| Bubble point (psi) |
n/a |
| Burst pressure (psi) |
87 |
| Flow rate (ml/min@10psi) |
280 |
| Holdup volume |
100 |
| Volume throughput (ml) |
100 |
| Housing material |
PP |
| Sterilization |
Autoclave: 121 degrees Celsius for 30 minutes
Gamma: 5kg, for 8 hours |
